LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 47 (40 - Wheel Suspension Front Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 408519 Removing And Installing Front Spring Strut (Steel Springs) >> Preliminary Work >> Preliminary Work For Removing And Installing Front Spring Strut (Steel Springs) On Passenger's Side

Preliminary Work For Removing And Installing Front Spring Strut (Steel Springs) On Passenger's Side

WARNING: This page is about a different variant/trim than selected.
  1. For V8: 

    Remove torque support.

    > 103719 Removing and installing torque support - section on "REMOVING "

  2. Unclip bleeder valve -1-  at the coolant reservoir.
    G16329457Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Unclipping wire harness at right of engine compartment

  3. Unclip plug connections -2, 3-  from the holders at the cross panel.
scientia non olet · About LEMON Manuals