Technical Values
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| No. 1: Threaded connection securing anti-roll bar to suspension subframe | M10 x 62 thread | Tightening torque | 60 (44 ftlb.) Nm | ||
| Threaded connection securing anti-roll bar to anti-roll-bar mount (hose clamp) | Tightening torque | 12 (9 ftlb.) Nm |