LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 47 (40 - Wheel Suspension Front Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 405019 Removing And Installing Front Wheel Bearing Housing (Wheel Carrier) >> Subsequent Work >> Subsequent Work For Removing And Installing Front Wheel Bearing Housing (Wheel Carrier)

Subsequent Work For Removing And Installing Front Wheel Bearing Housing (Wheel Carrier)

WARNING: This page is about a different variant/trim than selected.
  1. Fit the wheel.

    > 440519 Removing and installing wheel - section on "INSTALLING "

  2. Fit the axle nut to the specified tightening torque.

    > Refer to the appropriate Tightening Torques For Front Axle service information

    Operate the brake whist doing so (2 mechanics required).

  3. Fit the hub cap.

    > 440519 Removing and installing wheel - section on "INSTALLING "

scientia non olet · About LEMON Manuals