LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 47 (40 - Wheel Suspension Front Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 400619 Removing And Installing Front-Axle Carrier >> Subsequent Work >> Subsequent Work For Removing And Installing Front-Axle Carrier

Subsequent Work For Removing And Installing Front-Axle Carrier

WARNING: This page is about a different variant/trim than selected.
  1. On vehicles with 19-inch brake system:

    Fit the air guide.

    > 407719 REMOVING AND INSTALLING FRONT ANTI-ROLL BAR (PDCC)  - section on "Installing"

  2. Fit engine guard.

    > 108019 Removing and installing engine guard - section on "INSTALLING "

  3. Fit the front wheels.

    > 440519 Removing and installing wheel - section on "INSTALLING "

  4. Remove engine support at the body.

    > 1001IN SUPPORTING THE ENGINE ON THE BODY

  5. Bleed the power steering.

    > 4890IN TEST AND ASSEMBLY WORK ON POWER STEERING

  6. Bleed the PDCC system.

    > 430307 BLEEDING PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)

  7. Perform suspension alignment.

    > 449503 SUSPENSION ALIGNMENT, COMPLETE

scientia non olet · About LEMON Manuals