Kickdown Accelerator Pedal Module (Cayenne (92A) Tiptronic Only)
WARNING: This page is about a different variant/trim than selected.
Necessary after:
- Re-programming DME control unit
- Replacing DME control unit
- Replacing accelerator pedal module
How?
PIWIS Tester:
- Preconditions:
- 1.1 Engine off
- 1.2 Ignition on
- Select menu:
- 2.1 DME
- 2.2 Maintenance/repairs
- 2.3 Adaptations
- 2.4 Kickdown adaptation
- Start function: F8
- Press accelerator pedal fully and release it again after 30 seconds
- Switch off ignition (see also Information)