LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (20 - Fuel Supply, Actuator (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 205019 Removing And Installing Sucking Jet Pump >> Installing Sucking Jet Pump

Installing Sucking Jet Pump

WARNING: This page is about a different variant/trim than selected.
  1. Slide the sucking jet pump into the fuel tank through the opening in the left connection unit.
  2. Position the sucking jet pump -1-  in the fuel tank and clip it into the holder -2-  .
    G16310139Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Clipping in sucking jet pump

  3. Connect the sucking jet pump connections -1 and 2-  at the fuel pump. These must lock with an audible click.
    G16310140Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Connecting sucking jet pump connections

  4. Connect the connection -3-  until it engages securely.
scientia non olet · About LEMON Manuals