LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (20 - Fuel Supply, Actuator (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 203819 Removing And Installing Fuel Supply Line >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove engine.

    > 100119 Removing and installing engine -  "REMOVING "

  2. Remove rear cardan shaft.

    > 393519 Removing and installing rear cardan shaft -  "REMOVING "

  3. Remove rear right wheel housing liner.

    > WM 536919 REMOVING AND INSTALLING REAR WHEEL HOUSING LINER "Removing"

  4. Detach carbon canister with degassing tank and filler neck.

    > 202519 Removing and installing carbon canister -  "REMOVING "

    > 201019 Removing and installing fuel tank -  "REMOVING "

  5. Open the filler flap.
  6. Remove rear seat.

    > WM 724819 REMOVING AND INSTALLING 2/3-SPLIT FOLDING REAR SEAT (EXCEPT CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0)) "Removing"

scientia non olet · About LEMON Manuals