WM, 201519 Removing And Installing Fuel Level Sensor: Information
WARNING: This page is about a different variant/trim than selected.
Information
- The two senders have different shapes and may not be switched.
- The float installed in the left direction of travel is flat, while the float installed in the right direction of travel is spherical.
- The removal of both senders is explained in parallel in this description. If only one sender has to be removed, the other side of the tank can remain untouched.
Both fuel level sensors
| left | Fuel level sender 1 installed in vehicle tank on the right. |
| right | Fuel level sender 2 installed in vehicle tank on the left. |