Technical Values
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Sheet-metal ring on connection unit | Tightening torque | 145 (107 ftlb.) Nm | +/- 5 (3.5 ftlb.) Nm | ||
|
Sheet-metal ring on connection unit |
|||||
| Cap on connection unit | Tightening torque | 10 (7.5 ftlb.) Nm | |||
|
Cap on connection unit |
|||||