LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (13 - Engine - Crank Drive, Pistons (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> Ti, 1378 Drive Belt: Observe Instructions For Removal/Installation (59/12)

Ti, 1378 Drive Belt: Observe Instructions For Removal/Installation (59/12)

WARNING: This page is about a different variant/trim than selected.

Information 

This Quick Information is valid until July 13, 2013

Model year 

From 2008

Vehicle Type: 

Cayenne S (9PA)/Cayenne GTS (9PA)/Cayenne Turbo (9PA) 

Cayenne S (92A)/Cayenne Turbo (92A) 

Panamera/Panamera S/Panamera Turbo 

Concerns: 

Drive belt 

Information: 

Frequent complaints about "torn drive belts" following repairs or after workshop campaign WB19 is carried out. 

If the drive belt is removed and installed during repairs,

particularly during "WB19 Workshop campaign - Replacing coolant regulator (47/11)", 

the drive belt can be damaged as a result of incorrect handling and 

the drive belt can tear  when the vehicle is subsequently driven.

NOTE: NOTIFICATION 
Drive belt removed and installed incorrectly 

References: 

> 137819 REMOVING AND INSTALLING DRIVE BELT