LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (10 - Engine - Crankcase, Suspension (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 108019 Removing And Installing Engine Guard >> Removing Engine Guard

Removing Engine Guard

WARNING: This page is about a different variant/trim than selected.
  1. Unscrew side fastening screws -1-  for the front part of the engine guard.
    G16308293Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening fastening screws at the sides

  2. Unscrew rear -2-  and front fastening screws -3-  for the front part of the engine guard.
    G16308294Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening fastening screws at the front

  3. Remove front part of engine guard.
  4. Unscrew rear -5-  and front fastening screws -4-  for the rear part of the engine guard.
    G16308295Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening fastening screws at the rear

  5. Remove rear part of engine guard.
G16308296Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing rear engine guard