LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> 20 - Fuel Supply, Actuator (4.8L Turbo) -- 92A - Cayenne (92A) >> WM, 204819 Removing And Installing Leakage Diagnosis Pump >> Preliminary Work >> Installing Leakage Diagnosis Pump (Ldp)

Installing Leakage Diagnosis Pump (Ldp)

  1. Check rubber flange -3-  for damage and replace it if necessary.
    G16309146Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Installing leakage diagnosis pump

    1 Leakage diagnosis pump
    2 Carbon canister
    3 Rubber flange
    4 Air hose
    5 Fastening screws
  2. Fit rubber flange -3-  on the connection piece on the leakage diagnosis pump and fit leakage diagnosis pump -1-  on the carbon canister -2-  (-B-  ).
  3. Screw in three fastening screws.
  4. Fit air hose -4-  on the leakage diagnosis pump -1-  (-B-  ).
scientia non olet · About LEMON Manuals