Technical Values
TIGHTENING TORQUE SPECIFICATIONS
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Torque support to bracket on body and valve cover | Initial tightening/aluminum screw, M10/Item 1/Always replace threaded connection following removal | Tightening torque | 20 (15 ftlb.) Nm | ||
|
Installation position of torque support |
|||||
| Torque support to bracket on body and valve cover | Final tightening/aluminum screw, M10/Item 1/Always replace threaded connection following removal | Torque angle | 180° | ||
|
Installation position of torque support |
|||||