LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> 42 - Rear Wheel Suspension Drive Shaft (4.8L Turbo) -- 92A - Cayenne (92A) >> WM, 423519 Removing And Installing Upper Control Arm >> Removing And Installing Upper Control Arm At The Front >> Removing Upper Control Arm At The Front

Removing Upper Control Arm At The Front

  1. Remove rear level sensor on the upper trailing arm at the front

    > 431955 REPLACING REAR LEVEL SENSOR

  2. Remove threaded joint -2-  for the front control arm on the chassis subframe.
    G16318559Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Threaded joint for upper trailing arm (inner)

  3. Remove threaded joint -2-  for the front control arm at the wheel bearing housing.
    G16318560Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Threaded joint for upper trailing arm (outer)