LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> 40 - Wheel Suspension Front Drive Shaft (4.8L Turbo) -- 92A - Cayenne (92A) >> WM, 404119 Removing And Installing Front Drive Shaft >> Preliminary Work >> Preliminary Work For Removing And Installing Front Drive Shaft

Preliminary Work For Removing And Installing Front Drive Shaft

  1. Remove hub cap using > 9229 - puller hook and loosen drive shaft mounting at the wheel side before raising the vehicle. Operate the brake while doing this (2 mechanics required).
    G16318367Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Lock nut on drive shaft (shown as an example)

  2. If installed: 

    Remove air guide.

    >407719 REMOVING AND INSTALLING ANTI-ROLL BAR 

    >407719 REMOVING AND INSTALLING FRONT ANTI-ROLL BAR (PDCC) 

  3. Remove connecting link.

    >407819 REMOVING AND INSTALLING FRONT CONNECTING LINK 

scientia non olet · About LEMON Manuals