Installing Rear Logo With Model Designation

Insert the correct interchangeable insert -1- into logo template - E2 9864 -2- .
The following interchangeable inserts can be selected: Interchangeable insert - E2 9864/1 , Interchangeable insert - E2 S 9864/2 , Interchangeable insert - E2turbo 9864/3 , Interchangeable insert - E2turbo S 9864/4 , Interchangeable insert - E2 S hybrid 9864/5 , Interchangeable insert - E2 GTS 9864/6

Fig 1: Preparing Logo Template
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Position the logo template -1- on the vehicle.
1. 2.1. Position the edges -2, 3- of the logo template -1- flush with the rear lid.
2. 2.2. Press logo template -1- firmly onto the rear lid.
  
  Fig 2: Positioning Logo Template
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove protective paper from the logo -1- .
Align the logo -1- using the logo template -2- and press it on firmly.

Fig 3: Aligning Logo
Courtesy of PORSCHE CARS NORTH AMERICA, INC.