Removing Rear Panel
Information
- The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
- The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
- Some steps must be carried out automatically.
- Some of the repair illustrations show only one side of the vehicle.
- Unscrew screws -1- .
- Remove expansion rivets -1- .
- Unclip plastic bracket -2- on rear panel.
- Unclip reinforcement -1- by pulling it up out of the rear panel.
- Unclip locking lugs -2- on the rear panel on the rear skirt.
- Remove rear panel.