Removing Front Wire Harness
Information
- Some of the repair illustrations show only one side of the vehicle .
- Naturally, some steps also have to be performed on the opposite side of the vehicle as well .
USA vehicles
- Release and disconnect electric plug connections on the side marker lights.
Vehicles with Real Top View
- Release and disconnect electric plug connection on the front camera. → 916919 REMOVING AND INSTALLING FRONT CAMERA
All vehicles
- Release electric plug connections -1- on the fog lights -a- and disconnect them by pulling them downwards.
- Release electric plug connections -1- on the ParkAssist sensors -2- (-a- ) and press and disconnect them.
- Release electric plug connections -1-
on the auxiliary headlights -2-
(-a-
) and disconnect them.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Information
Always comply with the regulations for handling ESD-sensitive components!
- Assembly work may only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche .
- The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed .
- Never touch the electric pins and plug contacts .
- Release and disconnect electric plug connection on the garage door opener control unit -a- .
- Release and disconnect electric plug connection on outside-temperature sensor -1- .
- Unclip electric plug connections for the front right wire harness at the front apron.
- Disconnect front wire harness -1-
from the front apron at the fastening points -2-
.
USA vehicles
- Loosen sub-parts for side marker lights from the front apron at the fastening points.
Vehicles with Real Top View
- Loosen sub-part for front camera from the front apron at the fastening points.