Installing Multi-Functional Switch

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Overview of multi-functional switch

1. Put multi-functional switch on the selector shaft.
2. Adjust multi-functional switch.

   > 373115 ADJUSTING MULTI-FUNCTIONAL SWITCH 

3. Position cable on multi-functional switch.
4. Install heat shield on the transmission. To do this, screw in three fastening screws -arrow-  .

   > Tightening torque 10 (7.5 ftlb.) Nm

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Heat shield to right side of transmission

5. Functional test of gear selecting system:
   • Will the vehicle start?
   • Do all the selector-lever positions work?