- Secure the vehicle to prevent it from rolling away.
- Move selector lever to position N.
- Disconnect selector lever cable at the transmission by unscrewing two screws on the support and unclip the ball joint at the reversing lever.
>371519 REMOVING AND INSTALLING SELECTOR LEVER CABLE
- Remove centre air vents at the left and right.
> WM 855319 REMOVING AND INSTALLING CENTRE AIR NOZZLE (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))
- Remove PCM 3.1 display and operator control unit.
> WM 911019 REMOVING AND INSTALLING PCM DISPLAY AND OPERATOR CONTROL UNIT (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S HYBRID, CAYENNE S E, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))
- Remove selector knob.
>370419 REMOVING AND INSTALLING SELECTOR KNOB
- Remove centre console cover at the top and bottom.
> WM 681919 REMOVING AND INSTALLING CENTRE CONSOLE COVER (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))
- Remove switch console.
> WM 962719 REMOVING AND INSTALLING SWITCH CONSOLE (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))
"Removing"