Removing Front Connecting Link

→ Wear personal protective gear.

→ Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels).

1. Only for 19-inch brake system: 

   Remove air guide. → 407719 REMOVING AND INSTALLING FRONT STABILIZER (PDCC) 

2. Raise the vehicle.
3. Loosen the bottom fastening screw -2-  on the connecting link -5-  .
   Fig 1: Adjusting Front Connecting Link

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Raise the lower axle support -3-  as far as required using a suitable jack -4-  so that the upper fastening screw -1-  on the connecting link can be loosened and removed easily.
5. Remove the connecting link -5-  .