Removing Anti-Roll Bar

Information 

• The pictures shown in this document may differ from the original  .

1. If installed:  Remove the fastening screws on the air guide -8-  at the left and right. Use a suitable tool to counter the fastening nuts -9-  .
   Fig 1: Identifying Air Guide And Screws

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Remove connecting link at the left and right of the anti-roll bar.
3. Unscrew and remove the four fastening screws on the anti-roll bar and remove the clips.
4. Carefully pull out the anti-roll bar.