Preliminary Work For Removing And Installing Rear Spring Strut (Air Springs)
- Remove the relevant side panel of the luggage compartment cover.
> 700619 REMOVING AND INSTALLING TRIM PANEL FOR LUGGAGE COMPARTMENT (LUGGAGE COMPARTMENT COVER) AT THE LOCK SUPPORT - section on "Removing"
- Remove wheel
> 440519 Removing and installing wheel - section on "REMOVING ".
- Bleed the spring strut.
To bleed the levelling system (compressed air must be released from the system), use the Porsche System Tester. To do this, select the Bleed levelling system menu item in the levelling system.