LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne S >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> 43 - Leveling System, Air Suspension, Damper Control (4.8L Non Turbo) -- 92A - Cayenne (92A) >> WM, 430419 Removing And Installing Valve Block >> Subsequent Work >> Subsequent Work For Removing And Installing Front-Axle Valve Block

Subsequent Work For Removing And Installing Front-Axle Valve Block

  1. Fit front wheel housing liner at the right.

    > WM 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER - section on "Installing"

  2. Fit the front right wheel.

    > 440519 Removing and installing wheel - section on "INSTALLING "

  3. Bleed the system.

    >430307 BLEEDING PORSCHE DYNAMIC CHASSIS CONTROL (PDCC) 

  4. Check the hydraulic fluid level and top up if necessary.

    >430501 CHECKING FLUID LEVEL (PDCC) 

  5. Start the PDCC system.
  6. To do this, connect the Porsche System Tester and proceed as follows:

    Select PDCC control unit.

    • Select the "Maintenance/repairs" menu.
    • Select "PDCC start-up".

    The system start-up is performed automatically. In other words: system activation and calibration as well as testing runs automatically.

scientia non olet · About LEMON Manuals