Subsequent Work For Removing And Installing Rear-Axle Valve Block

Bleed the system.
>430307 BLEEDING PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)
Check the hydraulic fluid level and top up if necessary.
>430501 CHECKING FLUID LEVEL (PDCC)
Start the PDCC system.
To do this, connect the Porsche System Tester and proceed as follows:
- Select PDCC control unit.
- Select the "Maintenance/repairs" menu.
- Select "PDCC start-up".
The system start-up is performed automatically. In other words: system activation and calibration as well as testing runs automatically.