LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 48 (46 - Brakes - Brake Mechanism (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 4650TW Technical Data/Brake Wear Limits >> Technical Values >> Technical Data - 19-Inch Brake System (Cayenne Turbo/Cayenne Gts)

Technical Data - 19-Inch Brake System (Cayenne Turbo/Cayenne Gts)

WARNING: This page is about a different variant/trim than selected.
Location Description Type Basic value Tolerance
Service brake (footbrake) with grey cast iron brake discs (standard brake) with PSM (Porsche Stability Management) as standard Hydraulic dual-circuit brake system with brake-circuit division per axle. Vacuum brake booster, internally ventilated brake discs with six-piston aluminium monobloc fixed-calliper brake on front axle and four-piston aluminium monobloc fixed-calliper brake on rear axle.      
PSM Porsche Stability Management (PSM) as standard with the functions Anti-lock Brake System (ABS), Anti-Slip Regulation (ASR), Engine Drag Torque Control (EDTC), Automatic Brake Differential (ABD), brake force boosting, brake system pre-filling.      
Tandem brake booster Ø (vacuum)     9/10 Zoll  
Boost ratio     8  
Brake master cylinder Ø     28.57 mm  
Brake-circuit division     24/12 mm  
Brake disc Ø, front     390 mm  
Brake disc Ø, rear     358 mm  
Brake disc thickness, front     38 mm  
Brake disc thickness, rear     28 mm  
Thickness tolerance of brake disc, max.     0.01 mm  
Effective brake disc Ø, front     323.4 mm  
Effective brake disc Ø, rear     302.2 mm  
Piston Ø in front brake calliper 6 x 36 mm      
Piston Ø in rear brake calliper 4 x 32 mm      
Brake pad area, front     480 cm2  
Brake pad area, rear     200 cm2  
Total brake pad area     680 cm2