Preliminary Work
WARNING: This page is about a different variant/trim than selected.
Raise the vehicle.
Remove wheel. Use assembly aids (assembly pins) -1- .
> 440519 REMOVING AND INSTALLING WHEEL
Assembly aids (threaded bolts for fitting wheel)
Information
- Do not open the brake system.
- Do not loosen the brake hose from the brake calliper when loosening the brake calliper.
- The core of the warning contact line must not be exposed! Worn insulation is not important!
- If necessary, remove a little brake fluid from the reservoir by suction in order to prevent an overflow when the disc brake pads are pushed back.
- Partially remove brake calliper.