Preliminary Work
WARNING: This page is about a different variant/trim than selected.
Information
- Do not open the brake system.
- Do not loosen the brake hose from the brake calliper when loosening the brake calliper.
- The core of the warning contact line must not be exposed! Worn insulation is not important!
- If necessary, remove a little brake fluid from the reservoir by suction in order to prevent an overflow when the disc brake pads are pushed back.
Raise the vehicle.
Remove wheel. Use assembly aids (assembly pins) -1- .
> 440519 REMOVING AND INSTALLING WHEEL
Assembly aids (threaded bolts for fitting wheel)