WM, 477601 Checking Vacuum Pump: Information
WARNING: This page is about a different variant/trim than selected.
Information
The vacuum pump creates the necessary vacuum for the following components and functions:
- The variable intake system on naturally aspirated engines (secondary load).
- Sports flap exhaust system (secondary load).
- The tank leakage test on US vehicles (secondary load).
- Wastegate control on turbo vehicles (secondary load).
- Brake booster (main load - large connection)
Defects in the specified systems can be caused by a defective vacuum pump. To avoid replacing components based on suspected defects and repeat repairs, the function of the vacuum pump must be checked.
The vacuum pump -1- is fitted at the rear of the right cylinder head on V-engines.
Vacuum pump (mechanical)
Vacuum pump with connections
| 1 | Vacuum pump |
| 2 | Screw, M6 x 25 |
| 3 | Sealing ring |
| 4 | Sealing ring |
| 5 | Secondary load connection |