LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 42 (43 - Leveling System, Air Suspension, Damper Control (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 430419 Removing And Installing Valve Block >> Installing Front-Axle Valve Block

Installing Front-Axle Valve Block

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order.

    Observe specified tightening torques:

    Front valve block to wheel housing: > Tightening torque 10 Nm (7.4 ftlb.) 

    Line to front valve block: > Tightening torque 28 Nm (20.7 ftlb.) 

scientia non olet · About LEMON Manuals