LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 41 (42 - Rear Wheel Suspension Drive Shaft (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 429019 Removing And Installing Rear Anti-Roll Bar >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
WARNING: Wheel bearing housing raised incorrectly 
  • Risk of crushing 
  • Risk of damage to components 
    • Wear personal protective gear.
    • Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels).
  1. Raise the vehicle.

    > 4X00IN LIFTING THE VEHICLE

  2. Remove rear right wheel.

    > 440519 Removing and installing wheel - section on "REMOVING "