LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 41 (42 - Rear Wheel Suspension Drive Shaft (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 423519 Removing And Installing Upper Control Arm >> Removing And Installing Upper Control Arm At The Rear >> Removing Upper Control Arm At The Rear

Removing Upper Control Arm At The Rear

WARNING: This page is about a different variant/trim than selected.
  1. Remove threaded joint -1-  for the rear control arm on the chassis subframe.
    G16318564Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Threaded joint for upper trailing arm (inner)

  2. Remove threaded joint -1-  for the rear control arm at the wheel bearing housing.
    G16318565Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Threaded joint for upper trailing arm (outer)