LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (40 - Wheel Suspension Front Drive Shaft (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 405019 Removing And Installing Front Wheel Bearing Housing >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Fit wheel.

    > 440519 REMOVING AND INSTALLING WHEEL

  2. Tighten the new axle nut while at the same time pressing the brake (requires help from another person).

    > 404119 REMOVING AND INSTALLING THE FRONT DRIVE SHAFT 

    > Tightening torque 460 (340 ftlb.) Nm --

  3. Install hub caps.
scientia non olet · About LEMON Manuals