LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (40 - Wheel Suspension Front Drive Shaft (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 405019 Removing And Installing Front Wheel Bearing Housing >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove hub cap using >9229 - puller hook  .
  2. Unscrew the lock nut for drive shaft -1-  . To do this, operate the brake (help required).

    >404119 REMOVING AND INSTALLING FRONT DRIVE SHAFT 

    G16318400Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Lock nut on drive shaft (shown as an example)

    1. 2.1  Replace lock nut.
  3. Remove wheel.

    > 440519 REMOVING AND INSTALLING WHEEL

scientia non olet · About LEMON Manuals