LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (37 - Automatic Transmission - Actuator, Housing (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 370819 Removing And Installing Selector Support >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Secure the vehicle to prevent it from rolling away.
  2. Move selector lever to position N.
  3. Disconnect selector lever cable at the transmission by unscrewing two screws on the support and unclip the ball joint at the reversing lever.

    >371519 REMOVING AND INSTALLING SELECTOR LEVER CABLE 

  4. Remove centre air vents at the left and right.

    > WM 855319 REMOVING AND INSTALLING CENTRE AIR NOZZLE

  5. Remove PCM 3.1 display and operator control unit.

    > WM 911019 REMOVING AND INSTALLING PCM DISPLAY AND OPERATOR CONTROL UNIT

  6. Remove selector knob.

    >370419 REMOVING AND INSTALLING SELECTOR KNOB 

  7. Remove centre console cover at the top and bottom.

    > WM 681919 REMOVING AND INSTALLING CENTRE CONSOLE COVER

  8. Remove switch console.

    > WM 962719 REMOVING AND INSTALLING SWITCH CONSOLE - section on "Removing"

scientia non olet · About LEMON Manuals