Throttle-Housing Cover
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - THROTTLE-HOUSING COVER
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Loudspeakers for exterior acoustics on hatch, throttle valve part | M6 x 30 | Tightening torque | 8 Nm (5.9 ftlb.) | |
| Screw-type clamps for intake tubes | Tightening torque | 5.5 Nm (4.1 ftlb.) | ||
| Throttle housing cover on throttle body | cylinder screw M8 x 60 | Tightening torque | 23 Nm (17 ftlb.) |