Subsequent Work

Complete Steps 1 and 2 together. Set the timing before completing the final tightening of the camshaft controllers and sprockets. 

> WM, 150516 TIMING FOR CAMSHAFTS 

1. Install camshaft controllers for timing adjustment.

   > 158419 REMOVING AND INSTALLING ACTUATOR FOR CAMSHAFT (CAMSHAFT CONTROLLER) 

2. Install camshaft timing gears for timing adjustment.

   > 150719 REMOVING AND INSTALLING CAMSHAFT TIMING GEAR 

3. The high-pressure pump must be fitted after installing the intake camshaft for cylinder bank 5 to 8.

   > 246319 REMOVING AND INSTALLING HIGH-PRESSURE PUMP

4. Install valve cover.

   > 158219 REMOVING AND INSTALLING CYLINDER HEAD COVER .