Technical Values
TIGHTENING TORQUE SPECIFICATIONS
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Fastening screws on restraining straps | M8 | Tightening torque | 23 (17 ftlb.) Nm | ||
| Collar nut on heat shield | M6 | Tightening torque | 10 (7.5 ftlb.) Nm | ||
| Fastening screw on heat shield | M6 | Tightening torque | 10 (7.5 ftlb.) Nm | ||
| Fastening screws securing heat shield to cardan shaft | M6 | Tightening torque | 10 (7.5 ftlb.) Nm | ||
| Collar nut securing heat shield to cardan shaft | M8 | Tightening torque | 20 (15 ftlb.) Nm |