Technical Values

Location	Des...	Type	Basic val...
Generator to lower part of crankcase and upper part of crankcase	M8 x 95 (2 ea.)	Tightening torque	23 (17 ftlb.) Nm
Nut for B+ line to generator	M8 - Item 1	Tightening torque	15 Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. B + line at the generator
Screw on generator	M6	Tightening torque	10 (7.5 ftlb.) Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Holder for three-phase generator lines
Screws securing crash console to three-phase generator	M6 -Item 4	Tightening torque	10 Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Crash console
Screw securing ground cable to generator	M8 - Item	Contact force	20 Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Securing ground strap on generator