Replacing AGM Battery
Information
The AGM (absorbent glass M at) battery is a maintenance-free , sealed Tighten screw-type clamps securing intake pipe. battery.
Serial number and part number on the battery
- This battery must not be opened. If the battery is opened, it must be replaced.
- There is a serial number -A- and a part number -B- on the top right-hand side of the battery.
- After rep lacing the battery, the serial number and part number as well as the battery size and manufacturer must be entered using the PIWIS Tester under: Gateway/Maintenance, repairs/Battery replacement.
- The battery size and battery manufacturer must also be entered when replacing the battery.
- Remove left front seat.
- Remove and install battery.
- Install left front seat
Information
The AGM (absorbent G lass M at) battery is a maintenance-free , sealed Tighten screw-type clamps securing tp intake pipe. battery.
Serial number and part number on me Battery
- This battery muse not be opened. If the battery is opened, it must be replaced.
- There is a serial number -A- aid a part number -B- on the top right-hand side of the battery.
- After replacing the battery, the serial number and part number as well as the battery size and manufacturer must be entered using the PIWIS Tester under: Gateway/Maintenance, repairs/Battery replacement.
- The battery size and battery manufacturer must also be entered when replacing the battery.
- Carry out work instruction after disconnecting the battery.