Installing Fuel Pump

Place the pump in the holder on the tank floor and turn it approx. 90° to the right until it is seated securely.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Turning the pump
Connect the sucking jet pump connections -1 and 2- at the fuel pump. These must lock with an audible click.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connecting sucking jet pump connections
Connect the connection -3- until it engages securely.
Fit a new seal in the opening of the tank at the left and right. > Seal

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Seal
Pull the fuel line on the pressure regulator through the fuel tank to the left connection unit using the attached piece of wire or similar item.
Clip in the fuel line -3- on the left connection unit.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fuel line on left connection unit
Connect all connections on the underside of the right connection unit.
Insert the left and right connection unit into the tank. When doing so, make sure that the plastic lugs are pointing forward.