Intake Module On Naturally Aspirated Engine

Fig 1: Intake Module Components Location With Torque Specifcation - Naturally Aspirated Engine

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Intake module on naturally aspirated engine

TIGHTENING TORQUE SPECIFICATIONS

1	Intake module
2	Decoupling module (fastening part): observe tightening sequence > Tightening torque 15 (1 ftlb.) Nm -- dang --
3	Screw. 5 x 16 > Tightening torque 4 (3 ftlb.) Nm -- dang -- and > Tightening torque 4 (3 ftlb.) Nm -- dang --
4	Pressure sensor
5	Intake module seal; check that seal is aligned and fitted correctly!
6	Heat socket
7	Screw. 6 x 50 > Tightening torque 7 (5 ftlb.) Nm -- dang --
8	Electronic accelerator
9	Seal
10	Ball socket