Removing Door Entry Guard
Information
- Some of the repair illustrations show only one side of the vehicle.
- Naturally, some steps also have to be performed on the opposite side of the vehicle as well.
- Remove cover strip for door entry guard at the front -1-
.
- 1.1. Unclip cover strip for door entry guard at the front -1- using an assembly wedge -B- .
- 1.2. Guide cover strip for door entry guard at the front -1- to the rear -A- and remove it.
- Remove cover strip for door entry guard at the rear -2-
.
- 2.1. Unclip cover strip for door entry guard at the rear -2- using an assembly wedge.
- 2.2. Remove cover strip for door entry guard at the rear -2- (-C- ).
- Remove door entry guard.
- 3.1. Unscrew and remove fastening nuts -3- for the door entry guard -4- .
- 3.2. Remove door entry guard -4- .