Removing Front Wheel Cover
- Detach front wheel housing liner at the wheel arch.
- 1.1. Unscrew fastening screws on the wheel arch -1-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Press the wheel housing liner aside.
- Unscrew front fastening screws -1-
on the front apron -2-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Pull off safety clip -3-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Unscrew fastening screws -4-
on the wing -5-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Remove wheel cover on wing.
- 6.1. Heat up wheel cover -6-
on the wing -5-
using a hot-air blower (hot-air blower WE Leister-Electron
).
- 6.2. Prise wheel cover -6-
off the wing -5-
evenly all the way around using an assembly wedge -arrow-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Remove wheel cover on front apron.
- 7.1. Heat up wheel cover -7-
on the front apron -2-
with a hot-air blower.
- 7.2. Prise wheel cover -7-
off the front apron -2-
evenly all the way around using an assembly wedge -arrow-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Clean bonding areas.
- 8.1. Remove adhesive residue in the assembly area -A-
with an erasing disc (erasing disc Nr.174 Pos.1
).
- 8.2. Wipe off fitting area -A-
with a cloth soaked in isopropanol.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.