Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Roof to sliding-roof panel (D1) | Roof only recessed | Gap dimension | 1 mm | -1 mm | |
|
Roof to sliding-roof panel |
|||||
| Sliding-roof panel to roof (D2) | Roof only raised | Gap dimension | 0.8 mm | +0.2 mm | -0.8 mm |
|
Sliding-roof panel to roof |
|||||
| Roof to front lid (D3) | Gap dimension | 10 mm | +/-1.2 mm | ||
|
Roof to front lid |
|||||
| Roof to front lid (D4) | Gap dimension | 1.4 mm | +/-1 mm | ||
|
Roof to front lid |
|||||
| Front panel to rear panel (D5) | Gap dimension | 2 mm | +/-0.5 mm | ||
|
Front panel to rear panel |
|||||
| Front panel to rear panel (D6) | Gap dimension | 1 mm | +1.2 mm | -0.6 mm | |
|
Front panel to rear panel |
|||||
| Rear lid to roof (D7) | gap dimension | 10 mm | +/-1.2 mm | ||
|
Rear lid to roof |
|||||
| Rear lid to roof (D8) | Gap dimension | 0.8 mm | +/-1 mm | ||
|
Rear lid to roof |
|||||
| Wing to door (K3) | Gap dimension | 3.7 mm | +/-0.5 mm | ||
|
Wing to door |
|||||
| Wing to door (K3b) | Door only recessed | Gap dimension | 0 mm | -1 mm | |
|
Wing to door |
|||||
| Door frame to side panel (T1) | Gap dimension | 5.9 mm | +/-2 mm | ||
|
Door frame to side panel |
|||||
| Door frame to side panel (T1b) | Door frame only recessed | Gap dimension | 0 mm | +2 mm | |
|
Door frame to side panel |
|||||
| B-pillar trim on front door to B-pillar trim on rear door (T2) | Gap dimension | 4.2 mm | +/-1 mm | ||
|
B-pillar trim on front door to B-pillar trim on rear door |
|||||
| B-pillar trim on front door to B-pillar trim on rear door (T2b) | Flush | Gap dimension | 0 mm | +0.5 mm | -1.5 mm |
|
B-pillar trim on front door to B-pillar trim on rear door |
|||||
| Front door to rear door (T3) | Gap dimension | 4.2 mm | +/-0.8 mm | ||
|
Front door to rear door |
|||||
| Front door to rear door (T3b) | Rear door recessed | Gap dimension | 0 mm | -1 mm | |
|
Front door to rear door |
|||||
| Door panel to door entry guard (T4) | Gap dimension | 4.8 mm | +/-1.5 mm | ||
|
Door panel to door entry guard |
|||||
| Door panel to door entry guard (T5) | Gap dimension | 0.3 mm | +0.5 mm | -1.5 mm | |
|
Door panel to door entry guard |
|||||
| Front door panel to rear door panel (T6) | Gap dimension | 5.7 mm | +1.2 mm | -1 mm | |
|
Front door panel to rear door panel |
|||||
| Front door panel to rear door panel (T6b) | Flush | Gap dimension | 0 mm | +0.5 mm | -1.5 mm |
|
Front door panel to rear door panel |
|||||
| Front apron to front lid (B1) | Gap dimension | 3 mm | +/-0.7 mm | ||
|
Front apron to front lid |
|||||
| Front apron to front lid (B2) | Gap dimension | 1 mm | +/-0.9 mm | ||
|
Front apron to front lid |
|||||
| Front lid to headlights (K1) | Gap dimension | 3 mm | +/-1 mm | ||
|
Lid to headlights |
|||||
| Rear wing to front lid (K1) | Gap dimension | 3.5 mm | +0.7 mm | -0.9 mm | |
|
Lid to wing |
|||||
| Rear wing to front lid (K2) | Gap dimension | 2 mm | |||
|
Lid to wing |
|||||
| Spoiler to roof (R1) | Gap dimension | 5.5 mm | +/-1 mm | ||
|
Rear lid to roof |
|||||
| Spoiler to roof (R2) | Gap dimension | 1 mm | +/-1 mm | ||
|
Rear lid to roof |
|||||
| Lid to side panel (R3) | Gap dimension | 4 mm | +/-1 mm | ||
|
Rear lid to side panel |
|||||
| Lid to rear apron (R4) | Gap dimension | 4 mm | +/-1 mm | ||
|
Rear lid to rear apron |
|||||
→ Gap dimension: 1 mm-1 mm
→ Gap dimension: 0.8 mm+0.2 mm-0.8 mm