Installing Charge Air Cooler
- Install charge air cooler.
- 1.1. Guide charge air cooler and charge air line inwards from the outside -arrow-
.
- 1.2. Tighten three fastening screws -1-
to → Tightening torque: 7 Nm (5 ft. lb.)
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Install pressure pipe.
- 2.1. Push pressure pipe -3-
into the connection piece on the charge air cooler -2-
until it clicks into place.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 2.2. Lower the vehicle.
- Install charge air line.
- 3.1. Push charge air line -3-
onto the holder -4-
and slide it into the air box for throttle housing (Y-shaped pipe).
- 3.2. Fit circlip -2-
for holder.
- 3.3. Tighten hose clamp -1-
.
- 3.4. Clip vacuum hose into the two clips under the charge air line.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 3.5. Right side only:
Push hose -1-
onto the connection piece for the charge air line -2-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.