LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Base, Automatic Trans >> Repair and Diagnosis >> Suspension >> Rear Suspension >> 42 Rear Wheel Suspension, Drive Shafts -- 92A Cayenne >> WM 423519 Removing And Installing Upper Control Arm (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing And Installing Upper Control Arm At The Front >> Removing Upper Control Arm At The Front

Removing Upper Control Arm At The Front

  1. Remove rear level sensor on the upper trailing arm at the front → 431955 REPLACING REAR LEVEL SENSOR .
  2. Remove threaded joint -2-  for the front control arm on the chassis subframe.
    Fig 1: Identifying Threaded Joint For Upper Trailing Arm (Inner)
    G09935387Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Remove threaded joint -2-  for the front control arm at the wheel bearing housing.
    Fig 2: Identifying Threaded Joint For Upper Trailing Arm (Outer)
    G09935388Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals