Assembly Overview - Charge-Air Cooler
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Air guide for charge-air cooler
- O-ring on air guide hose for turbocharger
- Air guide hose for turbocharger
- Fastening screw for charge-air cooler → Tightening torque: 9 Nm (6.5 ft. lb.)
- Fastening screw for adapter → Tightening torque: 9 Nm (6.5 ft. lb.)
- Air guide hose for right charge-air cooler
- Adapter
- Fastening screw for adapter → Tightening torque: 9 Nm (6.5 ft. lb.)
- O-ring on boost pressure sensor replace
- Boost pressure sensor
- Fastening screw for boost pressure sensor → Tightening torque: 5 Nm (3.5 ft. lb.)
- Air guide hose to throttle valve control unit
- O-ring on adapter on charge-air cooler replace
- Charge-air cooler
- Screw-type clamp securing air guide hose to adapter → Tightening torque: 5.5 Nm (4 ft. lb.)