LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Base, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 - Exhaust Gas Turbocharging -- 92A Cayenne >> WM 211919 Removing And Installing Compressor Control Flap [Cayenne S E-Hybrid & Cayenne (3.0)] >> Technical Values

Technical Values

Location Description Type Basic value Tolerance 1 Tolerance 2
Fastening screw on engine suspension eyelet   Tightening torque 27 Nm (20 ft. lb.)    
Fastening screw on insulation plate   Tightening torque 5 Nm (3.5 ft. lb.)    
Fastening screw on throttle valve control unit   Tightening torque 10 Nm (7.5 ft. lb.)    
Fastening screw for connection piece   Tightening torque 10 Nm (7.5 ft. lb.)    
Fastening screw on holder   Tightening torque 9 Nm (6.5 ft. lb.)    
Fastening screw on regulating valve control unit   Tightening torque 10 Nm (7.5 ft. lb.)    
Fastening screw for intake air temperature sensor Replace Tightening torque 10 Nm (7.5 ft. lb.)    
Fastening nut on compressor   Tightening torque 20 Nm (15 ft. lb.)    
Fastening screw for boost pressure sensor Replace Tightening torque 10 Nm (7.5 ft. lb.)