Installing Compressor

Information 

For tightening torques, tightening sequence and assembly overview, see → 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES, ASSEMBLY OVERVIEWS

1. Installation is performed in reverse order. Pay particular attention to the following:
   1. 1.1. Replace seals.
   2. 1.2. Secure all hose connections with standard hose clamps.
2. When fitting the compressor, make sure that the connection piece for positive crankcase ventilation is installed at the correct position.
   Fig 1: Locating Connection Piece Of Positive Crankcase Ventilation

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.